Part Number Hot Search : 
C6005 PCA9542A SSW224 P80NE 222MPD TIP41 L75P80L IRH8250
Product Description
Full Text Search
 

To Download LO566EBL3-70H-A3-MT Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Cree(R) 5-mm Oval LED
Model # LO566EBL3-70H-A3-MT Data Sheet
70-degree, 5-mm oval LED lamp in blue color with tinted, transparent lens and no stopper
Applications
* * Variable-Message Signs Message Boards
Absolute Maximum Ratings (TA = 25C)
Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature
Note
Symbol IF IFP VR PD Topr Tstg Tsol
Absolute Maximum Rating 25 100 5 100 -40 ~ +95 -40 ~ +100
Unit mA mA V mW C C
Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb)
Note: Pulsewidth0.1msec,duty1/10.
Typical Electrical & Optical Characteristics (TA = 25C)
Characteristics Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity 50% Power Angle Symbol VF IR D IV 21/2H-H 21/2V-V Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA Unit V A nm mcd deg deg 465 550 470 1450 70 35 Minimum Typical 3.4 Maximum 4.0 100 475
D-CT533.001 Data Sheet: CL
Subject to change without notice. www.cree.com/ledlamps
1
Standard Bins for LO566EBL3-70H-A3-MT (IF = 20 mA)
Lamps are sorted to luminous intensity (IV)anddominantwavelength(D) bins shown. OrdersforLO566EBL3-70H-A3-MTmaybefilledwithanyorallbinscontainedasbelow. All luminous intensity (IV)anddominantwavelength(D)valuesshownandspecifiedareatIF = 20 mA.
X4
X5 V or above
Luminous Intensity (IV)
2130 mcd U 1520 mcd T 1100 mcd S 770 mcd R 550 mcd 465 nm 470 nm DominantWavelength(D) 475 nm
Forward Voltage (VF) Rank Voltage V7
2.8-3.0V
V8
3.0-3.2V
V9
3.2-3.4V
V10
3.4-3.6V
V11
3.6-3.8V
V12
3.8-4.0V
*Majority VF bins are highlighted in Yellow Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is 15%. 4. Tolerance of measurement of dominant wavelength is 1 nm. 5. Tolerance of measurement of VF is 0.05 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Pleaserefertothe"CreeLEDLampSoldering&Handling"documentforinformationabouthowtousethisLED product safely.
Copyright (c) 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps
2
CLD-CT533.001
Graphs


















1. Cathode PAD Area (0.18 x 0.18inch2) 2.Heightabovenominalseatingplaneininches(0.3inch)
Copyright (c) 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps
3
CLD-CT533.001
Mechanical Dimensions
All dimensions are in mm. Tolerance is 0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max.






Notes
RoHSCompliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in exempted application, in accordance with EU Direcan tive2002/95/EContherestrictionoftheuseofcertainhazardoussubstancesinelectricalandelectronicequipment (RoHS),asamendedthroughApril21,2006.

Cree logo
4





Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.



Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps
Copyright (c) 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the are registered trademarks of Cree, Inc.
CLD-CT533.001


▲Up To Search▲   

 
Price & Availability of LO566EBL3-70H-A3-MT

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X